ROD-L M100BVS5 Hi-Pot Tester The M100BVS5 Hi-Pot

Hi-Pot Tester The M100BVS5 Hi-Pot Tester is designed to perform the tests specified by U.L., I.E.C., C.S.A., V.D.E. and F.C.C. with an emphasis on safety, efficiency and speed. The unit applies the test voltage to the device being tested for a duration of time preset from 1 to 90 seconds. The device under test simply plugs into the front panel outlet, rather than being attached with clip leads. Clip leads can be used for devices without a power cord. Variable Voltage Variable Current Limit Real Current Detector Front Panel Dwell Time Select Front Panel Rise Time Select Manufacturer's Options Option 01 = Remote Control (Digital) Option 02 = Front Panel Dwell Time Adjust Option 03 = Front Panel Rise Time Adjust Option 05 = Hands Off Operation Option 06 = Rear Panel Lockout Cover Option 08 = Switch Selectable Current Fail Points Option 10 = Audible Testing Tone Option 15 = Rack Mounting Option 18 = OHMS Sense (Front Panel Recepticle is Blanked Out) Option 22 = Front Panel Voltage Adjust Option 23 = Digital Panel Meters Option 24 = Blank Front Panel (Receptacle and Start) Option 27 ="No Load" Trip Point Setting Option 28 = Two-Switch Selectable Current Scales Option 29 = Two-Switch Selectable Voltage Scales