WAVETEK 8502A System Digital Multimeter <br> 30

System Digital Multimeter
30 MHz to 40 GHz Frequency Range
Graph Mode for Plot of Pulse Profile
Full GPIB Control
Specifications

Frequency Range: 30 MHz to 40 GHz depending on detectors (see PEAK POWER SENSOR specifications)
Power Range
* Pulse: -20 dBm to +20 dBm
* CW: -40 dBm to +20 dBm
(See sensor specifications)
Time Base Range: 1.2 ns/div to 20 ms/div (12 ns to 200 ms time window), using either the Data Entry Keyboard or the Control Knob.
* Resolution: 0.1 ns
Trigger Delay Range: 0 to 200 ms using either the Data Entry Keyboard or the Control Knob.
* Resolution: 0.1 ns
Triggering Modes
* Internal: -10 dBm to +16 dBm
* External (BNC): TTL levels, Maximum PRF 1 MHz
Markers: Up to 4 markers/channel plus a Reference Power Level cursor
Graph Display Mode: Plots the outline of the detected pulse on the electroluminscent display
Output Channels
* 8501A: Single Channel
* 8502A: Dual Channel
Auxiliary Outputs/Inputs (BNC)
* Monitor: Provides a voltage proportional to the detected RF envelope. Risetime is typically 20 ns, output impedance is nominally 50W
* Analog Output: Provides a voltage proportional to detected power. Scale Factor is 100 mV/dB
* Trigger Input: TTL
* RF Blanking: TTL open collector low during zeroing. Used to control power source
* Voltage Proportional to Freq (V / GHz): Allows direct entry of frequency from RF power sources equipped with a V ľ F output
GPIB Interface